SPRAY FOAM AND COATINGS - URETHANE COATING

See USDA Bio Preferred page

(1-U-AT) 1 Component Urethane Aluminum Top Coat

Single Component Urethane Aluminum SPEC SHEET

SPEC Tech 1-U-AT is a single component, fire retardant moisture cure polyurethane elastomeric.

USAGE
This product is designed for use as a general purpose waterproofing coating. It provides weatherability, wear resistance, waterproofing and fire resistance to a variety of surfaces.

COLOR
Aluminum

(2-U-B) 2 Component Urethane Base Coat

Two Component Urethane Base Coat SPEC SHEET

DESCRIPTION
SPECTech 2-U-B is a 2 component, one to one by volume, batch mix polyurethane coating that has long pot life and fast tack free time allowing application of multiple coats of material in a shorter time than previous batch mix technology

COLOR
Standard colors for 2-U-B are black and grey. Custom colors are also available.

NOTE: SPECTech colors are not controlled, as they are used only as base coat to be overcoated with color-controlled top coats. Base coat colors will vary somewhat from batch to batch.

(2-U-T) 2 Component Urethane Top Coat

Two Component Urethane Top Coat SPEC SHEET

SPEC Tech 2-U-T is a two component, fire-retardant polyurethane elastomeric waterproofing coating.

USAGE
Use on roofs, mechanical room floors, walking and traffic decks where excellent weathering, fire retardance, toughness, fast cure and good solvent resistance are needed. Suitable substrates include concrete, plywood, sprayed in place polyurethane foam and metal.

STANDARD COLOR

U-6601 Oyster
U-6602 Pewter
U-6616 Shale
U-6618 Adobe

(2-U-CC) 2 Component Urethane Clear Coat

Two Component Urethane Top Coat SPEC SHEET

DESCRIPTION: (2-U-CC) is a soil resistant, color retentive, weatherable, two component,thermosetting aliphatic polyurethane coating.

USAGE: Intended for use in areas requiring outstanding color retention and resistance to weather,soil, abrasion, oils, cleaning compounds and water. Normally used as a final coat insystems requiring outstanding gloss, non-yellowing properties and water immersion and abrasion resistance.

CONSISTENCY: Both components are free flowing water white fluids.

STANDARD COLOR: Crystal Clear.

APPLIED PRODUCT DATA
WEATHERABILITY: Color retention, gloss retention, water resistance and durability are all outstanding.

CHEMICAL RESISTANCE:
Excellent for most chemicals. Good resistance to strong alkalis.

Spray Foam Powerpoint Show

^{POWERPOINT SHOW}^{Timer set for 5 seconds after load. You may pause with "Right Click" .}

EQUIPMENT FINANCING AVAILABLE

USAGEThis product is designed for use as a general purpose waterproofing coating. It provides weatherability, wear resistance, waterproofing and fire resistance to a variety of surfaces.

COLORAluminum

DESCRIPTIONSPECTech 2-U-B is a 2 component, one to one by volume, batch mix polyurethane coating that has long pot life and fast tack free time allowing application of multiple coats of material in a shorter time than previous batch mix technology

USAGEUse on roofs, mechanical room floors, walking and traffic decks where excellent weathering, fire retardance, toughness, fast cure and good solvent resistance are needed. Suitable substrates include concrete, plywood, sprayed in place polyurethane foam and metal.

STANDARD COLOR

USAGE
This product is designed for use as a general purpose waterproofing coating. It provides weatherability, wear resistance, waterproofing and fire resistance to a variety of surfaces.

COLOR
Aluminum

DESCRIPTION
SPECTech 2-U-B is a 2 component, one to one by volume, batch mix polyurethane coating that has long pot life and fast tack free time allowing application of multiple coats of material in a shorter time than previous batch mix technology

USAGE
Use on roofs, mechanical room floors, walking and traffic decks where excellent weathering, fire retardance, toughness, fast cure and good solvent resistance are needed. Suitable substrates include concrete, plywood, sprayed in place polyurethane foam and metal.