See USDA Bio Preferred page
|
|
PRIMERS
(1-A-P) 1 Component ACRYLIC Primer
(1-A-P) Single Component Acrylic Primer
DESCRIPTION
(1-A-P) Primer/Saturant is a low viscosity, high acrylic solids emulsion formulated as a deterrent to stains and asphalt bleeding. The super adhesion qualities permit use over most existing roof surfaces after cleaning.
(1-A-P) Primer/Saturant absorbs the fine dust commonly left after power washing or vacuuming roof surfaces. As a surface conditioner it assures a bond to chalky weathered acrylic coatings and loose granules on rolled roofing.
(1-U-P) 1 Component Urethane Primer / Sealer
(1-U-P) Single Component Urethane PrimerSpecTech 1-U-P is a single component moisture cured polyurethane.
USAGE
Intended for use as a sealer to be applied directly to concrete, wood, aluminum and epoxy primer. It is also suitable for use as a tie coat over weathered polymeric application of SpecTech coating systems.
(2-E-P) 2 Component Epoxy Primer
(2-E-P) Two Component Epoxy Primer
DESCRIPTION
A general purpose primer which may also be used as a masonry block filler. Do not use on copper or silver. Usage in the food processing industry is approved for contact with dry food products. SPEC Technologies Ilc. 2-E-P meets the requirements of the U.S Department of Agriculture for incidental contact with meat and poultry products. It adheres well to metals, polymeric coatings, wood, masonry and vitreous surfaces.
|
|
EQUIPMENT FINANCING AVAILABLE
 |
|
1-U-P : SINGLE COMPONENT URETHANE PRIMER APPLIED OVER EPDM PRIOR TO SPEC TECHNOLOGIES ALUMINUM POLYUREA
|
|
