formalde.html

The competition claims to be formaldehyde free.... you do the research.

water based phenolic modified melamine methylene linked sulfonamide amino

CHECK OUT THIS WEBSITE www.thermosetdata.com/PDF_files/aminos_and_furans.pdf

The following Videos are for educational purposes through public domain. SPEC Technologies does not claim the content.

Foam for the Home
&
Commercial Block full Insulation
A new product to add to your Insulation business
Or
Start a new Business

We are looking for Good Contractors!

Proven safe and profitable business
An Excellent way to add on a product to your existing insulation business.
Dealerships available across the U.S with very low investment.
We offer two packages F.O.B.
Packages starting as low as $11,000.00
Turn key packages starting at $25,000.00

    Includes: All equipment needed mounted in a 16'
    enclosed trailer. All training, (2) set of material,
    brochures, support and advertising help..

Or less dealership packages can be customized to fit your needs.

Most Frequently Asked Questions

Interior Foam Insulation

Product Information Sheet

R-Value per inch 4.6 / inch @ 75°F mean temperature1

R-Value 2x4 Cavity R-16 @ 75°F mean temperature1

R-Value 2x6 Cavity R-24 @ 75°F mean temperature1

Flame Spread 10 per ASTM E-84 @ 3.5" thick

Smoke Density 95 per ASTM E-84 @ 3.5" thick

Fire Classification Class I / Class A per NFPA Life Safety Code

Water Vapor Transmission 10.6 perms per ASTM E-96 @ 3-3/8" thick

Compressive Strength 4.50 / lbf/in2 per ASTM D-1621 @ 0.95" thick

1Thermal performance is portrayed to reflect typical installed conditions based upon NAVLAP accredited laboratory testing per ASTM C518 as well as industry accepted engineering calculations. InsulSmart Interior Foam Insulation? typically is installed at a density of 1.60 lbs./ft3; the above data is based upon ASTM C518 testing at 1.60 lbs./ft3 by R & D Services, Inc., Cookeville, TN. Thermal performance claims are based upon average density and conditions.

Interior Foam Insulation is a totally new insulation product featuring ultra low odor and shrinkage, having 50% less water content than similar foam products. It has a Class I/

Class A fire rating. Interior Foam Insulation is designed for enclosed cavities such as stud walls and cathedral ceilings. It is ideal for use in new and retrofit construction, both residential and commercial. Interior Foam Insulation provides exceptional thermal performance plus it has superior sound-absorbing properties.

Interior Foam Insulation is a 2-component foam product that is installed using compressed air with superior high speed installation equipment. A kiln-dried, water-based powder resin is combined with foaming agent catalyst to produce a freshly mixed product for each project.

Interior Foam Insulation resin has a 1-year shelf life. The shelf-life of mixed

Interior Foam Insulation is 30 days.

Interior Foam Insulation can be installed using most existing foam insulationequipment. The catalyst is ready to use and requires no mixing at the job site by the installer.

Interior Foam Insulation is superior to other competitive retrofit foam insulation products because of its low shrinkage of less than 0.25 percent and a Class I/Class A fire rating. It meets or exceeds all building code requirements. As with all foam-in-place insulation products,

Interior Foam Insulation neither adds to nor detracts from the fire rating of the wall assembly.

October 2007

Interior Foam Insulation - Test Results

R-Value vs Temperature

data by R&D Services, Inc.

4.97

4.59

4.32

4.20

4.40

4.60

4.80

5.00

5.20

5.40

5.60

25.00 35.00 75.00 110.00

Temperature (oF)

R-Value per inch

Foam Density: 1.60 lb/ft3

Range Varies +/- 1.5%

Spray Foam Powerpoint Show

^{POWERPOINT SHOW}^{Timer set for 5 seconds after load. You may pause with "Right Click" .}

EQUIPMENT FINANCING AVAILABLE